停车场设计规范

停车场Carpark

大厅Lobby

在停车库,设置扶梯和坡梯,大厅和汽车停靠位,设玻璃自动平移门及玻璃隔断墙、厅内吊顶、灯光及墙面、地面设计均需由凯德认可。

At carpark, provide escalators and

travellators, lobbies and car drop-off points in tempered the carpark. Entrance to lobbies shall have glass partitions and automatic sliding doors. Lobbies shall have proper ceiling, wall and floor finishes to be selected by Capitaland repreatatives.

所有扶梯/坡梯大厅玻璃位置下端内、外侧必须安装150mm高不锈钢防撞栏杆,靠近扶梯推车玻璃位置下端外侧必须设置150mm高不锈

The internal and external face of the

escalator/ travellator lobby shall have a row of 150mm high stainless steel railing or kerb. walls in the carpark area.

钢防撞栏杆,与玻璃面的水平距离为100mm。 This applies to all place where there glass

在扶梯/坡梯大厅需有停车收银处 (收银处预埋预留机电点位要求见"交楼标准"弱电专业)

The carpark cashier counter shall be provided within the escalator/travellator lobby.

停车收银处(1.5m x 2m) 必须有吊顶,所有门、Casher counter (1.5 x 2m) shall have security 橱柜、电脑柜、抽屉等必须上锁。(收银处预埋预留机电点位要求见"交楼标准"弱电专业)

ceiling. All doors, cabinets and drawers shall have lock (including computer cabinet).

机动车位Motorcycle Lots

必须提供合理的停车位和自行车位,其中汽车停车位数量与当地商业规划要求及商厦营运面积相匹配,如当地无要求,每150m²商业面积(Retail GFA)设一个车位,三,四线城市每200m²商业面积(Retail GFA)设一个车位。

Provide adequate parkings lots for car and bicycle according to bldgcode requirements. Should there be no official requirement, provide one carpark lot for every 150m2 of retail area. For 2 or 3 tier cities, provide one carpark lot for every 200m2 of retail area.

nd

rd

手推车区域Trolley Area

停车库设摆放手推车区域,数量视项目而定,具体位置按停车场区域均匀布置。

Provide trolley bays in the carpark.

你可能喜欢

  • 停车场设计防火规范
  • 汽车库防火设计规范
  • 江苏省商业建筑防火设计规范
  • 停车场设计方案
  • 地下停车场设计

停车场设计规范相关文档

最新文档

返回顶部