ABAQUS_实例
FEM ------ ABAQUS Practice
1. Problem Definition
Fracture mechanics concerns the interaction of the applied crack driving force and materials fracture resistance. For simple geometry and linear elastic materials fracture parameters can be easily calculated based on existing analytical equations. For complicated geometry and elastic-plastic materials finite element method is necessary. The main purpose of these computational exercises is to use ABAQUS to calculate the fracture parameters of a 2D plane strain single edge notched specimen.
1.1 Specimen geometry
The dimension of specimen is shown in Figure 1. The crack size (a) is 20 mm, specimen depth (w) is 50 mm and length (L) is 300 mm.
Figure 1 Dimensions of the specimen considered in this course
1.2 Materials
In general, four materials, one linear elastic material and three elastic-plastic materials will be considered in this exercise.
1.2.1 Linear elastic material
A linear elastic material will be considered first. Typical stress-strain curve for a linear elastic material is shown in Figure 2. There are two materials constants associated with a linear elastic material: Young’s modulus E and Poisson ratio ν.
你可能喜欢
- ABAQUS实例
- abaqus实例
- ABAQUS帮助
- abaqus问题
- abaqus模拟
- ABAQUS教程
- ABAQUS 参数化建模实例: 薄壁圆筒1页
- ABAQUS_实例20页
- ABAQUS实例分析论文24页
- FE_SAFE&ABAQUS实例7页
- 石亦平ABAQUS有限元分析实例详解之读后小结-完整版22页
- 石亦平ABAQUS有限元分析实例详解之读后小结-完整版3页
- abaqus耦合实例4页
- abaqus切削实例4页
- abaqus铣削加工实例8页
- abaqus基础实例结果云图6页
- abaqus实例10页
- abaqus实例4页
- ABAQUS-BAT帮助3页
- ABAQUS帮助范例中文索引3页
- ABAQUS帮助里关键字(keywords)翻译26页
- ABAQUS帮助里关键字(keywords)翻译30页
- ABAQUS帮助里关键字(keywords)翻译28页
- ABAQUS帮助文档翻译4页
- abaqus接触问题13页
- abaqus问题集锦6页
- abaqus第九章 动力问题21页
- abaqus中增量步问题2页
- 清华BBS abaqus经典问题解答24页
- abaqus常见操作问题14页
- 在abaqus中如何模拟3D 裂纹7页
- abaqus做了一个模拟预应力的模型问题1页
- abaqus 预应力模拟4页
- abaqus模拟预应力1页
- abaqus 模拟裂纹技术总结24页
- abaqus裂纹模拟问题汇总2页
- ABAQUS 6.11 安装教程26页
- ABAQUS FOR CATIA 教程14页
- ABAQUS基础教程37页
- ABAQUS简易教程12页
- ABAQUS_CAE基础教程讲义136页
- ABAQUS restart 教程21页